Stator Magneto For Yamaha Sidewinder BTX LTX MTX RTX STX XTX 17-21 8KJ-81410-00

Magneto Generator Stator Fit for Yamaha 1000 Sidewinder LTX BTX SRX STX XTX LE 2017-2021

Features:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included.
Connector included.
All products shipped are tested.

Specifications:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Generator Stator Coil

Replacement Part Number:
8KJ-81410-00

Fitments:
Fit for Yamaha 1000 Sidewinder 2017-2021
Fit for Yamaha 1000 Sidewinder L TX DX 2018
Fit for Yamaha 1000 Sidewinder L TX LE 2017-2021
Fit for Yamaha 1000 Sidewinder L TX SE 2020-2021
Fit for Yamaha 1000 Sidewinder L TX GT 2020-2021
Fit for Yamaha 1000 Sidewinder R TX LE 2017-2018
Fit for Yamaha 1000 Sidewinder R TX SE 2018
Fit for Yamaha 1000 Sidewinder B TX SE 153 2018
Fit for Yamaha 1000 Sidewinder B TX LE 2017-2020
Fit for Yamaha 1000 Sidewinder B TX LE 153 50TH 2018
Fit for Yamaha 1000 Sidewinder B TX LE 153 1.75 2018
Fit for Yamaha 1000 Sidewinder S 146 DX 2018
Fit for Yamaha 1000 Sidewinder SRX LE 2019-2021
Fit for Yamaha 1000 Sidewinder S TX GT 2020-2021
Fit for Yamaha 1000 Sidewinder S TX 137 DX 2017-2018
Fit for Yamaha 1000 Sidewinder M TX 153 2018
Fit for Yamaha 1000 Sidewinder M TX SE 153 2018
Fit for Yamaha 1000 Sidewinder M TX SE 162 2018
Fit for Yamaha 1000 Sidewinder M TX 162 2017-2018
Fit for Yamaha 1000 Sidewinder X TX SE 137 2018
Fit for Yamaha 1000 Sidewinder X TX SE 141 2018
Fit for Yamaha 1000 Sidewinder X TX 137 LE 2017
Fit for Yamaha 1000 Sidewinder X TX 141 LE 2017
Fit for Yamaha 1000 Sidewinder X TX LE 1 2019-2021
Fit for Yamaha 1000 Sidewinder X TX SE 1 2019-2021

(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)

Package Included:
1x Generator Stator Coil

NOTICE:
Before installing your new stator

Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.

All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.