Description
Magneto Generator Engine Stator 2K-1 Fit For 125/200/250/300/380 SX EXC SXS EGS 1998-2005
Features:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included.
Connector included.
All products shipped are tested.
Specifications:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Generator Stator Coil
Other Specifications :
Number of wires: 4
Number of pins: 4
Number of plugs: 4
Number of fixation holes: 3
Number of poles: 8
PART NUMBER(S):
50339004000
Fitments:
THESE MODELS USE 3 DIFFERENT TYPE OF STATORS.
2K-1 (IGNITION ONLY), 2K-2 (AC ONLY) & 2K-3 (FULL DC).
THIS ONE IS THE 2K-1 (IGNITION ONLY) VERSION.
BEFORE BUYING PLEASE MAKE SURE YOUR BIKE USES THE 2K-1 (IGNITION ONLY) VERSION.
Fit for 125/200/250/300/380 2K-1 Version
Fit for 125 EXC 2k-1 1998-2004
Fit for 125 MXC 2k-1 1998/2000-2003
Fit for 125 SX 2k-1 1998-2005
Fit for 125 EGS 2k-1 1998-1999
Fit for 125 SXS 2k-1 1999-2005
Fit for 200 EGS 2k-1 1998-1999
Fit for 200 EXC 2k-1 1998-2004
Fit for 200 MXC 2k-1 1998-2003
Fit for 200 SX 2k-1 2000-2004
Fit for 250 EXC 2k-1 2000/2002/2004
Fit for 250 MXC 2k-1 2000/2002
Fit for 250 SX 2k-1 2000/2002-2005
Fit for 250 SXS 2k-1 2000/2003-2005
Fit for 300 EXC 2k-1 2000/2002/2004
Fit for 300 MXC 2k-1 2000/2002/2004
Fit for 300 SX 2K-1 2000/2002
Fit for 380 SX 2k-1 2000/2002
Fit for 380 MXC 2k-1 2000/2002
Fit for 380 EXC 2k-1 2000/2002
Fit for 125 EXC SIX DAYS 2002-2004(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)
Package Included:
1x Generator Stator Coil
NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
Features:
Direct replacement to your original unit
Plug-and-play, direct fit, easy installation.
Highest grade lamination materials.
Highest grade copper windings, resistant to 200 degrees Celsius.
Pick up pulsar coil included.
Connector included.
All products shipped are tested.
Specifications:
Condition: Aftermarket 100% Brand New
Quanity: 1PC
Type: Generator Stator Coil
Other Specifications :
Number of wires: 4
Number of pins: 4
Number of plugs: 4
Number of fixation holes: 3
Number of poles: 8
PART NUMBER(S):
50339004000
Fitments:
THESE MODELS USE 3 DIFFERENT TYPE OF STATORS.
2K-1 (IGNITION ONLY), 2K-2 (AC ONLY) & 2K-3 (FULL DC).
THIS ONE IS THE 2K-1 (IGNITION ONLY) VERSION.
BEFORE BUYING PLEASE MAKE SURE YOUR BIKE USES THE 2K-1 (IGNITION ONLY) VERSION.
Fit for 125/200/250/300/380 2K-1 Version
Fit for 125 EXC 2k-1 1998-2004
Fit for 125 MXC 2k-1 1998/2000-2003
Fit for 125 SX 2k-1 1998-2005
Fit for 125 EGS 2k-1 1998-1999
Fit for 125 SXS 2k-1 1999-2005
Fit for 200 EGS 2k-1 1998-1999
Fit for 200 EXC 2k-1 1998-2004
Fit for 200 MXC 2k-1 1998-2003
Fit for 200 SX 2k-1 2000-2004
Fit for 250 EXC 2k-1 2000/2002/2004
Fit for 250 MXC 2k-1 2000/2002
Fit for 250 SX 2k-1 2000/2002-2005
Fit for 250 SXS 2k-1 2000/2003-2005
Fit for 300 EXC 2k-1 2000/2002/2004
Fit for 300 MXC 2k-1 2000/2002/2004
Fit for 300 SX 2K-1 2000/2002
Fit for 380 SX 2k-1 2000/2002
Fit for 380 MXC 2k-1 2000/2002
Fit for 380 EXC 2k-1 2000/2002
Fit for 125 EXC SIX DAYS 2002-2004(Compatibility Chart is for Reference ONLY!!!)
(Please Compare with Your faulty unit and the image we provided to Decide Fitments)
Package Included:
1x Generator Stator Coil
NOTICE:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.