Description
Features:
100% Brand New
Heated grip pads color: Black
Quantity: 2 pcs heated grip pads,connection wires,3 position switch,heat resistant tape,2 pcs heat resistant covers.
Voltage: 12V
Power: 10W x 2
stallation: Wiring type
Temperature: low:30℃ hight:50℃-60℃
3 Position Switch: low(30℃) / OFF / hight(50℃-60℃)
Specification:
1.Flexible , the pads fit under your grips without causing any loss of control.
2.Quick warm up time.
3.Adopt 3 position switch, the temperature can be adjusted according to demand.
4.Keep your hands warm in cold weather.
5.Work with all Motorcycle、Electromobile、Hand Trailer etc.
Package Includes:
2 x heated grip pads (with connection wires)
1 x switch
1 x heat resistant tape
2 x heat resistant covers
Installation Instruction:
[1] Place the heating film on the handlebar and make an adjustment for a suitable position.
[2] Wrap the heating film on the handlebar with tape tightly. Please pay attention to the wire.
[3] Put on the heat shrink sleeves for a good position, use a hot air gun (you can also use a lighter or a hair dryer) to blow the two creases of the outer sleeve longitudinally symmetrically until the shrinkage is uniform, and then blow other parts evenly until the outer sleeve Each part of the tube shrinks evenly and flat
[4] The switch is installed under the mirror rod of the rear-view mirror
[5] Connect the power cord, the red wire and the black wire are not divided into positive and negative poles, but must be connected to the lower pole output line of the electric door lock (where the key is inserted)
100% Brand New
Heated grip pads color: Black
Quantity: 2 pcs heated grip pads,connection wires,3 position switch,heat resistant tape,2 pcs heat resistant covers.
Voltage: 12V
Power: 10W x 2
stallation: Wiring type
Temperature: low:30℃ hight:50℃-60℃
3 Position Switch: low(30℃) / OFF / hight(50℃-60℃)
Specification:
1.Flexible , the pads fit under your grips without causing any loss of control.
2.Quick warm up time.
3.Adopt 3 position switch, the temperature can be adjusted according to demand.
4.Keep your hands warm in cold weather.
5.Work with all Motorcycle、Electromobile、Hand Trailer etc.
Package Includes:
2 x heated grip pads (with connection wires)
1 x switch
1 x heat resistant tape
2 x heat resistant covers
Installation Instruction:
[1] Place the heating film on the handlebar and make an adjustment for a suitable position.
[2] Wrap the heating film on the handlebar with tape tightly. Please pay attention to the wire.
[3] Put on the heat shrink sleeves for a good position, use a hot air gun (you can also use a lighter or a hair dryer) to blow the two creases of the outer sleeve longitudinally symmetrically until the shrinkage is uniform, and then blow other parts evenly until the outer sleeve Each part of the tube shrinks evenly and flat
[4] The switch is installed under the mirror rod of the rear-view mirror
[5] Connect the power cord, the red wire and the black wire are not divided into positive and negative poles, but must be connected to the lower pole output line of the electric door lock (where the key is inserted)