Descripción
Refurbished Printhead Print Head 10 Series For Kodak ESP Printer 3 5 7 9 5100 5500 6150 7250
Feature:
Excellent performance and high quality.
Made of high-quality material, durable, firm and stable for us to use.
This is a cleaned, thoroughly tested and sealed Printhead.
Good stability, long lifespan.
Replacement For Kodak 10 Series Print Head for ESP 3 5 7 9 5100 5300 5500 3250 5250 6150 7250.
Product Condition : Original Refurbished Printhead ,95% New.
Full color function.
Size:73x60MM
Compatible Models:
For Kodak EASYSHARE 5100
For Kodak EASYSHARE 5300
For Kodak EASYSHARE 5500
For Kodak ESP 3
For Kodak ESP 3250
For Kodak ESP 5
For Kodak ESP 5210
For Kodak ESP 5250
For Kodak ESP 6150
For Kodak ESP 7
For Kodak ESP 9
For Kodak ESP 9250
For Kodak ESP Office 6150
Specifications:
Item Type: Print Head
Material: Plastic
Size: 11x8x6cm/4.3x3.1x2.3in
Packing includes:
1 x print head
Note:
1.In print entered please turn off the power of the printer, or it will cause the mainboard chip burned.
After loading the print head, please don't install ribbon overhead 10 pieces of A4 document,
so that make the new needle have a running-in process, and then put the ribbon. I hope you can be careful operation.
2.If the original print head was broken and especially leaked ink, the mainboard has burned possibly,
so please troubleshoot the problem of the mainboard before replacing the print head. In addition,
the F1,F2 fuze wire of mainboard can only be replaced by the original fuze that has same current value and same model.
If replacing fuze that is biger current value and different model, Both printhead and mainboard are possible to be broken.
3.Print head requires lots of attention, It is easy to cause man-made damage if a non-professionals replace printhead blindly.
There is a regulation that printhead is not warranty, and it is delicate and expensive.
please do not make commissioning on the machine, and please treat it with caution.
4.If you are not familiar with the machine, it is recommended that you had better send the print head to a repair station
or find professionals to replace the nozzle, so as to avoid unnecessary losses and unnecessary trouble.