Descripción
Features:
Brand new pickup/pulsar coil for you to repair your stator.
Direct replacement to your original unit.
Plug-and-play, direct fit, easy installation.
Often unavailable from the OEM manufacturer.
All products shipped are tested.
Specifics:
Condition: 100% Brand New
Quantity: 1 PC
Type: Pick up pulsar coil
Dimensions:
Height: 19 mm
Length: 26 mm
Width: 21 mm
Bracket center to center: 35 mm
Wires length: Approx.870mm
Other specifications:
Number of wires: 2
Number of plugs: 1
Number of pins: 2
Replacement Part Number(P/N):
21003-0074
Fitment:
For Kawasaki EX250 Ninja 250R 2008-2012
Package:
1 x Pick up pulsar coil
Note:
Not following these instructions may result in damaging the part or other components on your vehicle.
-By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
-Insulate your solders with heat shrink.
-Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
-Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010 in.
-If no spark or erratic spark, switch the wires at the plug.
Warranty:
Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems
Brand new pickup/pulsar coil for you to repair your stator.
Direct replacement to your original unit.
Plug-and-play, direct fit, easy installation.
Often unavailable from the OEM manufacturer.
All products shipped are tested.
Specifics:
Condition: 100% Brand New
Quantity: 1 PC
Type: Pick up pulsar coil
Dimensions:
Height: 19 mm
Length: 26 mm
Width: 21 mm
Bracket center to center: 35 mm
Wires length: Approx.870mm
Other specifications:
Number of wires: 2
Number of plugs: 1
Number of pins: 2
Replacement Part Number(P/N):
21003-0074
For Kawasaki EX250 Ninja 250R 2008-2012
Package:
1 x Pick up pulsar coil
Note:
Not following these instructions may result in damaging the part or other components on your vehicle.
-By using a small soldering iron weld the wires to the ones on your OEM wiring harness.
-Insulate your solders with heat shrink.
-Before attempting to start your vehicle, adjusting the air gap is necessary for certain models.
-Rotate the fly wheel by hand so the raised node is lined up with the pick up /pulsar coil and adjust as close as possible, but no less than 0.010 in.
-If no spark or erratic spark, switch the wires at the plug.
Warranty:
Returns: Customers have the right to apply for a return within 60 days after the receipt of the product
24-Hour Expert Online: Solve your installation and product problems