1.Direct replacement to your original unit
2.Plug-and-play, direct fit, easy installation.
3.Highest grade lamination materials.
4.Highest grade copper windings, resistant to 200 degrees Celsius.
5.Pick up pulsar coil included.
7.All products shipped are tested.
Condition: Aftermarket 100% Brand New
Type: Generator Stator Coil
Replacement Part Number: 3D9-H1410-10, 3D9-H1410-12
Note: Please check the Manufacturer Part Number before ordering.
Interior diameter : 36.8mm/1.44"
Exterior diameter : 92mm/3.62"
Pole's Thickness : 26.5mm/1.04"
Pole's Width : 11mm/0.43"
Number of wires: 6
Number of pins: 6
Number of plugs: 3
Number of fixation holes: 3
Number of poles: 18
For Yamaha YB125 YB125SPD 2008
For Yamaha YBR125ED/3D9 2008-2014
For Yamaha YBR125ED/51D 2012
Product Size Chart:
Before installing your new stator
Check the AC output of the stator.
Replace any burned or corroded connectors on stator and regulator/rectifier.
Check and repair any melted wiring.
Use hi-temp dielectric grease on all connectors
Our stator may use a different wire color code than your original.
All of the wires are installed in the correct order; please do not change any of the wiring configurations.
This stator is designed as a direct plug-in replacement and should be used as such.
When bolting stator in, always use locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation.
All item pictures are accurate; if in doubt do not hesitate to compare our item to your original part.
1x Generator Stator Coil